Skip to content

Toyota Yaris 2012 Key Fob & Car Keys

Keys that fit the 2012 Toyota Yaris: smart keys, flip keys and remote keys, 2 or 3 buttons, FCC ID BF2EK, 12BBY or 12BDS, 4D-60 or 4D-72 (G) chip, 312 MHz, 315 MHz or 433 MHz. 34 compatible keys, remotes & shells (genuine and aftermarket) available for the 2012 Toyota Yaris.

Last updated: 17 November 2026

Key specifications for the Toyota Yaris 2012

Key types
smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
312 MHz, 315 MHz and 433 MHz
Buttons
2- and 3-button
Transponder chip
4D-60 · 4D-72 (G) · 4D-67 · 8A (H-chip)
Blade profile
TOY43
Part numbers
89904-52511 · 89070-52752 · 89071-71051 / 89071-71052 · 89070-52D70 / 89070-52D10 · 89070-52F40
Battery
CR2016 · CR2032

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 312 MHz, 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Toyota Yaris 2012 key

Key with a blade (regular or flip)

8 tools list this key. 5 of them list all keys lost.

  • Launch X-431 IMMO
    • Add key
    • All keys lost
    • Remote
    • Add key
    • All keys lost
    • Remote
  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    • Add key
    • All keys lost
  • Advanced Diagnostics AD100 Pro / MVP Pro
    • Add key
  • Advanced Diagnostics Smart Pro
    • Add key
  • Lonsdor KH100
    • Remote

All keys lost is listed by Launch X-431 IMMO, Lonsdor K518, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX and Autel IM608 II / IM608 Pro II. Advanced Diagnostics AD100 Pro / MVP Pro and Advanced Diagnostics Smart Pro list add key only.

Programming steps

Add key - Autel MaxiIM IM508 / IM608

Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)

  1. Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
  2. Connect the VCI to the OBD port. IMMO > Toyota > select the model and year > Blade key > Immobilizer, then the key learning function.
  3. Insert the working master key and switch the ignition on when asked.
  4. Remove it, insert the new cut key and leave the ignition off (if learning fails, run it again with the ignition on).
  5. Wait for the security light to go out: the key is learned. Check it switches on and starts.
  6. Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
Watch out: A valet key cannot add keys: you need a master key. Use the chip family the car already has: a 4D key will not learn on a G car, a G key not on an H car.
Add key - Lonsdor K518ISE / K518S / K518 Pro

Needs: working master key, new key cut to the car with the same chip family (4D, G or H / 8A)

  1. Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
  2. Connect the K518 by OBD. Immobilizer > Toyota > select the model and year (or the 4D-G type menu) > Mechanical key > Add key.
  3. Insert the master key and switch the ignition on.
  4. When asked, insert the new cut key and switch the ignition on and off as the tool prompts.
  5. Wait until the tool reports the key programmed, then test that it starts.
  6. Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
Watch out: A valet key cannot add keys: you need a master key. Use the chip family the car already has: a 4D key will not learn on a G car, a G key not on an H car.
All keys lost - Autel MaxiIM IM508 / IM608

Needs: new keys cut to the car with blank 4D-67/68 or G chips, no PIN entry (the tool resets by OBD)

  1. Cut the new keys first, with the chip family of the car (4D-67/68 or G).
  2. Connect the VCI to the OBD port. IMMO > Toyota > select the model and year > Blade key > Immobilizer > All keys lost (immobilizer reset).
  3. Answer how many keys you will register and keep the driver door open during learning.
  4. Follow the ignition prompts (off, on, off and remove the key, on again) while the tool resets the immobilizer.
  5. Within 120 s register the keys: insert a master key, switch on and wait 5 s; repeat for each further key; with only one or two keys, finish by switching the ignition on and off quickly 5 times.
  6. The security light goes out when programming is done. Test every key.
  7. Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons.
Watch out: The reset erases every registered key: bring every key the customer will keep and program them in the same session. You have about 120 s after the reset to register the keys; have them cut and on the bench before you start. Battery charged and steady during the reset. Not for H (8A) blade cars: see the 8A all-keys-lost entries.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro

Needs: new keys cut to the car with blank 4D-67/68 or G chips, Lonsdor chip written as Toyota G (optional, G cars), no PIN entry (the tool resets by OBD)

  1. Cut the new keys first. For a G car the chip must be a Toyota G (80-bit); a Lonsdor blank can be written as Toyota G in the K518 (Generate key chip) before you start.
  2. Connect the K518 by OBD. Immobilizer > Toyota > select the model and year > Mechanical key (4D or G type) > Reset immobilizer (all keys lost).
  3. Follow the ignition prompts (off, on, off and remove the key, on again) while the tool resets and configures the immobilizer.
  4. Within 120 s register the keys: insert a master key, switch on and wait 5 s; repeat for each further key; with only one or two keys, finish by switching the ignition on and off quickly 5 times.
  5. The security light goes out when programming is done. Test every key.
  6. Add further keys later with the normal add-key routine and one of the new masters.
  7. Remote-head key: in the tool's remote menu choose remote learning, switch on, open the driver door, then within 30 s hold LOCK + UNLOCK together for about 2 s and press LOCK once; test the buttons. Remotes not learned in this step stop working.
Watch out: The reset erases every registered key: bring every key the customer will keep and program them in the same session. You have about 120 s after the reset to register the keys; have them cut and on the bench before you start. Battery charged and steady during the reset. Not for H (8A) blade cars: see the 8A all-keys-lost entries.

Key type not stated by the list

2 tools list this key. 2 of them list all keys lost.

Without a tool

The remote is not programmed on the car by hand: it needs a tool or a dealer.

When the key changed

Smart key (push to start)

  • 2014 - 2018Chip: 8A433 MHz(GCC / Europe cars)Vios-based sedan sold as Yaris in the GCC
  • 2017 - 2020Chip: ID49315 MHzFCC: WAZSKE13D01(US / Canada cars)Mazda-built Yaris iA and Yaris sedan; Mazda key system
  • 2023 - 2024Chip: 4A433 MHz(GCC / Europe cars)

Key with a blade (regular or flip)

  • 1999 - 2005Chip: 4CBlade: TOY41RSold as Echo in North America
  • 2006 - 2010Chip: 4D-67(GCC / Europe cars)
  • 2007 - 2011Chip: 4D-67Blade: TOY43(US / Canada cars)Overlap years may be 4D-67 or G; G is stamped on the blade
  • 2011 - 2014This yearChip: G(GCC / Europe cars)
  • 2012 - 2014This yearChip: GBlade: TOY43(US / Canada cars)
  • 2015 - 2018Chip: H (8A)(US / Canada cars)Overlap years may be G or H; check the letter on the blade
  • 2015 - 2020Chip: H (8A)(GCC / Europe cars)Overlap years may be G or H; check the letter on the blade
  • 2023 - 2024Chip: 4A433 MHzBlade: TOY43(GCC / Europe cars)

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Toyota Yaris 2012?

34 listings fit the Toyota Yaris 2012: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Toyota Yaris 2012 remote use?

Listings for the Toyota Yaris 2012 come in 312 MHz, 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Toyota Yaris 2012 key use?

The listings for this car carry: 4D-60 · 4D-72 (G) · 4D-67 · 8A (H-chip). Check the chip in each listing's specifications.

Which FCC IDs do Toyota Yaris 2012 remotes carry?

The remotes listed for this car carry FCC ID 12BBY, 12BDS, B41TA, B51TA, B51TH, B71TA, BF2EK, GQ429T and others. Match it with the FCC ID printed on your original remote.

Which blade profile does the Toyota Yaris 2012 key use?

The blades listed for this car: TOY43.

Which tools program a Toyota Yaris 2012 key?

The tool makers' coverage lists name Launch X-431 IMMO, Lonsdor K518, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Autel IM608 II / IM608 Pro II and Advanced Diagnostics AD100 Pro / MVP Pro for this car; 5 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Toyota Yaris 2012 remote be programmed without a tool?

The remote is not programmed on the car by hand: it needs a tool or a dealer.