Skip to content
  1. Home
  2. Remote and Key Shell
  3. Remote Key Shell
  4. Land Rover 2005–2011 Remote Head Flip Key Shell - 3-button · FCC NT8-15K6014CFFTXA - Aftermarket · New
Land Rover 2005–2011 Remote Head Flip Key Shell - 3-button · FCC NT8-15K6014CFFTXA - Aftermarket · New

Land Rover 2005–2011 Remote Head Flip Key Shell - 3-button · FCC NT8-15K6014CFFTXA - Aftermarket · New

Aftermarket

SKU: B02574

$2.81
AED  10.00

Fits Land Rover LR3 2005–2011 ·

In Stock

Specifications

Aftermarket Land Rover remote head flip key shell for 2005–2011 LR3 / Discovery 3 / Range Rover Sport, shell only - no electronics. Replaces NT8-15K6014CFFTXA.

Money-back protection:
Claim a refund if your order doesn't ship, is missing, or arrives with product issues
Aftermarket · New

Land Rover 2005–2011 Remote Head Flip Key Shell - 3-Button, HU101

3-button · aftermarket replacement shell · no electronics, chip, or blade · HU101 profile · replaces NT8-15K6014CFFTXA

3
Buttons
HU101
Blade profile
No
Electronics
Replaces
NT8-15K6014CFF…

⭐ This is an aftermarket replacement remote head flip key shell for the Land Rover LR3 / Discovery 3 / Range Rover Sport (2005–2011), matching the NT8-15K6014CFFTXA remote key housing. It is an empty housing only - it carries no transponder chip, circuit board, battery, or cut blade, and is sized for a HU101-profile blade. The customer's existing working parts transfer into it, so it restores a cracked, worn, or water-damaged key without reprogramming. Intended for locksmiths and key shops handling Land Rover shell-swap work.

⚙️ Key features

Direct-fit replacement housing

Moulded to match the NT8-15K6014CFFTXA Land Rover key so the original board, buttons, and blade transfer straight across without modification.

Restores a failed shell, not the electronics

Fixes the common failure - cracked case, worn button membrane, snapped blade slot - while the customer keeps their already-programmed electronics, so no key programming is needed.

Sized for a HU101 blade

Accepts a HU101-profile blade (sold separately), cut to the customer's original bitting or copied from the old key.

💎 Benefits

Lower cost than a full key

Reusing the customer's working electronics turns a cracked Land Rover key into a shell swap instead of a new-key-and-programming job, protecting margin on a common repair.

No reprogramming downtime

Because the programmed board and chip carry over, the repaired key works the moment it's reassembled - a while-you-wait counter job rather than a bench programming session.

Low-cost stock line

A cheap, fast-moving spare for any shop already seeing Land Rover keys with cracked cases or worn buttons, with no license or tool dependency to hold it.

👥 Who it's for

Automotive locksmiths

Locksmiths refreshing worn or cracked Land Rover keys as a quick counter repair.

Key shops

Shops offering while-you-wait Land Rover shell swaps without touching the programmed electronics.

Garages and used-car dealers

Garages and dealers tidying up Land Rover keys on trade-in or workshop stock.

🚗 Compatible vehicles

LAND ROVER LR3 / Discovery 3 / Range Rover Sport - 2005–2011 NT8-15K6014CFFTXA remote head flip platforms -
This shell replaces the NT8-15K6014CFFTXA Land Rover remote head flip key - match the FCC ID and the HU101 blade profile against the customer's original before ordering.

📦 What's included

✅ IN THE BOX

✔ Land Rover remote head flip key shell (3-button) - empty housing

✔ Button pad / key back as moulded

❌ NOT INCLUDED

✘ Transponder chip - transfer from the customer's original key

✘ Circuit board / remote electronics - transfer from the original

✘ Battery - reuse or replace separately

✘ Cut key blade (HU101 profile) - sold separately, cut to the original bitting

📋 Specifications

🧰 SHELL
Type
Remote Head Flip Key Shell
Buttons
3
Blade profile
HU101 (blade sold separately)
FCC ID
NT8-15K6014CFFTXA
🚗 FITMENT
Make
Land Rover
Vehicles
LR3 / Discovery 3 / Range Rover Sport
Years
2005–2011
Function
Remote key
📦 PHYSICAL
Contents
Empty shell - no electronics
Condition
New, aftermarket
Chip
None - not included
Weight
40 g

🔧 Shell replacement - how to fit

🔑SHELL REPLACEMENT - TRANSFER YOUR PARTS

This is an empty replacement housing - it carries no electronics. Transfer the working parts from the customer's original Land Rover key into it; no reprogramming is needed when those parts are reused.

Open the original key split the customer's original Land Rover key and remove the circuit board, transponder chip, and battery.
Transfer the parts seat the board, chip, and battery into the new housing, then fit the button pad.
Fit the blade and test cut a HU101-profile blade to the original bitting (or copy the old blade), fit it, then test every button and the immobiliser.
Confirm coverage first: no reprogramming is needed when the original programmed electronics are reused; a new key and programming are only required if the customer's original board or chip is lost or destroyed.

Frequently Asked Questions

Common questions about this product

No. This is an empty remote head flip key shell only. It carries no transponder chip, circuit board, battery, or cut blade. Every working part transfers from the customer's original Land Rover key, which is exactly why no reprogramming is required afterward.
No, provided the customer's original board and transponder chip are transferred into the new shell. Because the already-programmed electronics carry over, the key works immediately once reassembled. Reprogramming is only needed if the original electronics are lost or destroyed.
It is sized for a HU101-profile blade, sold separately. Cut the HU101 blade to the customer's original bitting or copy the old blade, then fit it into the housing before returning the finished Land Rover key to the customer.
It replaces the NT8-15K6014CFFTXA Land Rover key fitted to 2005–2011 models. Match that FCC ID and the HU101 blade profile against the customer's original before ordering, since a single vehicle family can span several different shells across trims and years.
No. It is an aftermarket replacement housing, not a genuine Land Rover-branded component. It is intended as a cost-effective shell swap for a cracked or worn key, reusing the customer's own programmed electronics rather than replacing the complete key assembly.
No. This remote head flip key shell ships as an empty housing with no battery fitted. Reuse the battery from the customer's original key or fit a fresh coin cell of the same type when transferring the electronics across into the new shell.
Yes. Fitting is a mechanical shell swap - open the original Land Rover key, move the board and chip across, fit a blade, and test. No programmer or license is required as long as the original electronics are reused.

Last updated: 18 November 2026