Skip to content
  1. Home
  2. Remote and Key Shell
  3. Remote Key Shell
  4. Nissan Frontier / Titan / Xterra / Pathfinder 2003-2016 Keyless Entry Remote Shell - 2+1-button - Aftermarket · New
Nissan Frontier / Titan / Xterra / Pathfinder 2003-2016 Keyless Entry Remote Shell - 2+1-button - Aftermarket · New

Nissan Frontier / Titan / Xterra / Pathfinder 2003-2016 Keyless Entry Remote Shell - 2+1-button - Aftermarket · New

Aftermarket

SKU: B02929

$2.80
AED  9.97

Fits Nissan Frontier 2005–2016 ·

In Stock

Specifications

Nissan / Infiniti keyless entry remote shell for 2003-2016 Frontier / Titan / Xterra / Pathfinder / Armada (3-button fob), shell only. Replaces 28268-EA00A.

Money-back protection:
Claim a refund if your order doesn't ship, is missing, or arrives with product issues
Aftermarket · New

Nissan / Infiniti 2003-2016 Keyless Entry Remote Shell - 2+1-Button

2+1-button · aftermarket replacement shell · no electronics, chip, or blade · replaces 28268-EA00A

2+1
Buttons
No
Electronics
Replaces
28268-EA00A

⭐ The truck-and-SUV version of the Calsonic fob housing: three buttons - lock, unlock, panic - matching the 28268-EA00A donor that Frontier, Titan, Xterra, Pathfinder, Armada and their Infiniti cousins carried for over a decade. No trunk button, which is exactly how to tell it apart from the four-button sedan fob at the counter. Case, pad and battery clip ready for the original board and CR2025.

⚙️ Key features

Direct-fit replacement housing

Moulded to match the 28268-EA00A Nissan / Infiniti key so the original board, buttons, and blade transfer straight across without modification.

Restores a failed shell, not the electronics

Fixes the common failure - cracked case, worn button membrane, snapped blade slot - while the customer keeps their already-programmed electronics, so no key programming is needed.

Keyless-entry fob housing

Replaces the body of a bladeless keyless-entry fob - the mechanical door key on these vehicles is separate, so the swap involves only the board, button pad, and battery.

💎 Benefits

Lower cost than a full key

Reusing the customer's working electronics turns a cracked Nissan / Infiniti key into a shell swap instead of a new-key-and-programming job, protecting margin on a common repair.

No reprogramming downtime

Because the programmed board and chip carry over, the repaired key works the moment it's reassembled - a while-you-wait counter job rather than a bench programming session.

Low-cost stock line

A cheap, fast-moving spare for any shop already seeing Nissan / Infiniti keys with cracked cases or worn buttons, with no license or tool dependency to hold it.

👥 Who it's for

Automotive locksmiths

Locksmiths refreshing worn or cracked Nissan / Infiniti keys as a quick counter repair.

Key shops

Shops offering while-you-wait Nissan / Infiniti shell swaps without touching the programmed electronics.

Garages and used-car dealers

Garages and dealers tidying up Nissan / Infiniti keys on trade-in or workshop stock.

🚗 Compatible vehicles

🚙 NISSAN
Frontier2005-2016
Titan2004-2015
Xterra2005-2015
Pathfinder2005-2012
Armada2004-2015
Quest2004-2009
Murano2003-2007
Versa2007-2012
NV2012-2017
🚗 INFINITI
FX352003-2008
FX452003-2008
QX42002-2003
Coverage follows the three-button fob 28268-EA00A (KBRASTU15 / CWTWB1U733 family, 315 MHz). Match the face - lock, unlock, panic, no trunk button - against the customer's fob before ordering.

📦 What's included

✅ IN THE BOX

✔ Nissan / Infiniti keyless entry remote shell (2+1-button) - empty housing

✔ Button pad / key back as moulded

❌ NOT INCLUDED

✘ Transponder chip - transfer from the customer's original key

✘ Circuit board / remote electronics - transfer from the original

✘ Battery - reuse or replace separately

📋 Specifications

🧰 SHELL
Type
Keyless Entry Remote Shell
Buttons
2+1
Part number
28268-EA00A
For FCC ID
CWTWB1U733 / KBRASTU15
🚗 FITMENT
Make
Nissan / Infiniti
Vehicles
Frontier / Titan / Xterra / Pathfinder / Armada (3-button fo
Years
2003-2016
Function
Remote key
📦 PHYSICAL
Contents
Empty shell - no electronics
Condition
New, aftermarket
Chip
None - not included
Weight
40 g

🔧 Shell replacement - how to fit

🔑SHELL REPLACEMENT - TRANSFER YOUR PARTS

This is an empty replacement housing - it carries no electronics. Transfer the working parts from the customer's original Nissan / Infiniti key into it; no reprogramming is needed when those parts are reused.

Open the original key split the customer's original Nissan / Infiniti key and remove the circuit board, transponder chip, and battery.
Transfer the parts seat the board, chip, and battery into the new housing, then fit the button pad.
Reassemble and test close the housing, then test every button on the vehicle; range and function follow the original board, which is untouched by the swap.
Verify coverage first: no reprogramming is needed when the original programmed electronics are reused; a new key and programming are only required if the customer's original board or chip is lost or destroyed.

Frequently Asked Questions

Common questions about this product

No. This is an empty keyless entry remote shell only. It carries no transponder chip, circuit board, battery, or cut blade. Every working part transfers from the customer's original Nissan / Infiniti key, which is exactly why no reprogramming is required afterward.
No, provided the customer's original board and transponder chip are transferred into the new shell. Because the already-programmed electronics carry over, the key works immediately once reassembled. Reprogramming is only needed if the original electronics are lost or destroyed.
No. This housing replaces a keyless-entry fob that has no blade at all - the mechanical door key is a separate item on these vehicles. The shell swap covers only the remote: its board, buttons, and battery move across from the original fob.
It replaces the 28268-EA00A Nissan / Infiniti key fitted to 2003-2016 models. Match that Part number and the key type and blade against the customer's original before ordering, since a single vehicle family can span several different shells across trims and years.
No. It is an aftermarket replacement housing, not a genuine Nissan / Infiniti-branded component. It is intended as a cost-effective shell swap for a cracked or worn key, reusing the customer's own programmed electronics rather than replacing the complete key assembly.
No. This keyless entry remote shell ships as an empty housing with no battery fitted. Reuse the battery from the customer's original key or fit a fresh coin cell of the same type when transferring the electronics across into the new shell.
Yes. Fitting is a mechanical shell swap - open the original Nissan / Infiniti key, move the board and chip across, fit a blade, and test. No programmer or license is required as long as the original electronics are reused.

Last updated: 9 November 2026