Which Nissan Sentra does the 285E3-6LY5A smart key fit?

The 285E3-6LY5A smart key fits the Nissan Sentra and Versa 2023-2025 with the 5-button layout, North American version. Match the part number printed on the back of the original key, and the button layout, before ordering. A key with a different part number may not register.

Is the FCC ID enough to pick the right key?

No. The FCC ID KR5TXPZ3 is a radio approval that Nissan also uses on 285E3-6LY5E, 285E3-6RA5A, 285E3-6RA5E. Those keys can fit other cars or have other buttons, so the part number 285E3-6LY5A on the original key is the deciding reference.

What frequency and transponder chip does the 285E3-6LY5A key use?

The 285E3-6LY5A smart key transmits at 433 MHz and carries a HITAG AES, ID 4A (NCF29A1M) transponder inside the housing. No separate chip is needed, but the key must be registered to the car with a diagnostic tool before it unlocks the doors or starts the engine.

How is the Nissan Sentra 2023-2025 smart key programmed?

The Nissan Sentra and Versa 2023-2025 smart key is programmed over the OBD-II port with the dealer system or a locksmith key programmer that covers this model. Registration needs the BCM PIN and erases every stored key, so register all keys in one session.

Is the emergency blade included with the 285E3-6LY5A key?

No. The 285E3-6LY5A smart key is supplied as the key only, without its emergency insert blade; it takes an NSN14 profile blade. Source the blade separately and cut it to the vehicle's key code, by code or by decoding the door lock.

Is this 285E3-6LY5A key a genuine Nissan part?

Yes. This listing is a genuine factory Nissan 285E3-6LY5A smart key, supplied used, previously fitted to a vehicle, without the emergency blade. Check that your tool can register a used key on this platform before the job. Match the part number on the original first.

Which battery does the 285E3-6LY5A smart key take?

The 285E3-6LY5A smart key runs on a CR2032 coin cell battery, fitted inside the housing. Replace it when the range drops or the dashboard shows a low key battery warning. If the battery is flat, hold the key against the start button to start the car.

Nissan Sentra Versa 2023-2025 Key KR5TXPZ3 285E3-6LY5A Used

Name: Nissan Sentra Versa 2023-2025 Smart Key 5-button 433MHz - 285E3-6LY5A - Genuine · OEM · Used
Brand: Nissan
SKU: B00279
Price: 120 AED
Availability: InStock

Specification

Value

Vehicle Make

Nissan

Condition

Original / Used

Country of Manufacture

Mexico

Frequency

433 MHz

Battery

CR2032

Buttons Count

5-buttons

Transponder Id

HITAG 128-bits AES ID4A NCF29AXM

Fcc Id

KR5TXPZ3

7812D-TXPZ3

Part Number

285E3-6LY5A / 285E3-6LY5E

Weight

0.06 kg

Genuine · OEM · Used

Nissan Sentra Versa 2023-2025 Smart Key 5-Button

5-button · 433 MHz · ID4A · FCC ID KR5TXPZ3 · Part 285E3-6LY5A

Buttons

433 MHz

Frequency

ID4A

Transponder chip

CR2032

Battery

⭐ This is a used genuine factory Nissan unit: a 5-button smart key for the Nissan Sentra and Versa 2023-2025, Nissan part number 285E3-6LY5A, transmitting at 433 MHz with a HITAG AES, ID 4A (NCF29A1M) transponder. It is supplied as the key only, without the emergency blade, and is registered over OBD with a diagnostic tool. The same radio approval is fitted to 285E3-6LY5E, 285E3-6RA5A, 285E3-6RA5E, so the part number, not the FCC ID, decides the order.

⚙️ Key features

5-button layout

5 buttons as fitted to the Sentra and Versa proximity key, with push-button start.

433 MHz with ID4A

433 MHz transmitter paired with a HITAG AES, ID 4A (NCF29A1M) transponder for proximity entry and push-button start.

FCC ID is shared

Its radio approval is also used on 285E3-6LY5E, 285E3-6RA5A; the part number 285E3-6LY5A is the reference.

CR2032 coin cell

Runs on a user-replaceable CR2032 battery. The emergency blade is sourced separately.

💎 Benefits

Every button working

The 5-button layout matches the car, so the customer keeps every remote function.

Fewer wrong orders

Ordering by part number 285E3-6LY5A avoids returns from look-alike keys.

Factory electronics

A genuine Nissan unit, so the electronics match the original key exactly.

Customer confidence

A factory key reassures customers who want the same part the car was built with.

👥 Who it's for

Automotive locksmiths

Add-key and all-keys-lost jobs on the Nissan Sentra and Versa with OBD key programmers.

Key shops and counter trade

Stock for walk-in spare key requests on the Sentra and Versa.

Dealers and garages

Replacement keys for used Sentra and Versa stock and service customers.

🚗 Compatible vehicles

NISSANSentra2023-2024

NISSANVersa2023-2025

Before ordering, match part number 285E3-6LY5A or FCC ID KR5TXPZ3 printed on the original key.

📦 What's included

✅ IN THE BOX

✔ 1 × genuine used 5-button smart key with HITAG AES, ID 4A (NCF29A1M) transponder

❌ NOT INCLUDED

✘ Emergency insert blade (NSN14 profile) - source separately and cut to the vehicle's key code

✘ Programming to the vehicle - done over OBD with a diagnostic tool

📋 Specifications

📡 REMOTE

FCC ID

KR5TXPZ3

Frequency

433 MHz

Buttons

Key type

Smart proximity key, push-button start

7812D-TXPZ3

🔐 TRANSPONDER & BLADE

Transponder chip

HITAG AES, ID 4A (NCF29A1M)

Emergency key blade

Not included

Blade profile

NSN14

📦 PHYSICAL & POWER

Battery

CR2032

Weight

60 g

Condition

Genuine · OEM · Used

🔢 PART NUMBERS

285E3-6LY5A part number

IMPORTANT - READ BEFORE ORDERING

BCM PIN and all keys in one session - Nissan Intelligent Key registration needs the BCM PIN, calculated from the challenge code the tool reads, and it erases every stored key, so all of the customer's keys must be registered in the same session.

FCC ID is not enough - the same approval number is used on 285E3-6LY5E, 285E3-6RA5A, 285E3-6RA5E, so match part number 285E3-6LY5A on the original.

Not the 285E3-6LY1E key - a different part number; match 285E3-6LY5A on the original.

Market version - this key is the North American version; check the part number on the original before ordering.

Blade not included - this key is supplied without its emergency insert blade; source an NSN14 blade and cut it to the vehicle's key code.

Used genuine key - this key was previously fitted to a vehicle; check your tool can register a used key on this platform before the job.

🛠️ Programming instructions

🔌OBD PROGRAMMING - DIAGNOSTIC TOOL REQUIRED

This proximity smart key cannot be learned by hand. It is registered to the car through the OBD-II port with a diagnostic tool.

Compatible tools: the Nissan CONSULT dealer system, or locksmith tools whose software lists this model, such as Launch X431 Immo, Autel IM608.

Add key (spare): connect over OBD, read the BCM challenge and calculate the PIN, then register the new key together with every existing key the customer keeps, because registration erases all stored keys.

All keys lost: the BCM PIN is calculated from the challenge code first, then each key is registered in the same session.

Blade: cut the NSN14 emergency blade, sourced separately, to the vehicle's key code and test it in the driver's door.

Check coverage first: support depends on the tool's software version and the exact model year. Verify the Nissan Sentra and Versa 2023-2025 smart key is in the tool's supported list before the job.