Skip to content
  1. Home
  2. Keys and Remotes
  3. PCB Board
  4. Toyota Camry 2018-2022 Corolla 2020-2022 Remote Key Board 4-button - 315MHz - HYQ12BFB - Board Only - Genuine · OEM · Used
Toyota Camry 2018-2022 Corolla 2020-2022 Remote Key Board 4-button - 315MHz - HYQ12BFB - Board Only - Genuine · OEM · Used

Toyota Camry 2018-2022 Corolla 2020-2022 Remote Key Board 4-button - 315MHz - HYQ12BFB - Board Only - Genuine · OEM · Used

Used original

SKU: B06693

$5.62
AED  20.00

Fits Toyota Camry 2018–2022 ·

  • 315 MHzFrequency
  • 4-buttonButtons

In Stock

Specifications

Genuine Toyota flip key remote board, 4-button, 315 MHz, FCC ID HYQ12BFB, out of part 89070-06790. Board only, used, no shell, blade or transponder.

Money-back protection:
Claim a refund if your order doesn't ship, is missing, or arrives with product issues
Genuine · OEM · Used

Toyota Camry 2018-2022 Corolla 2020-2022 Remote Key Board 4-Button

board only · 4-button · 315 MHz · FCC ID HYQ12BFB · out of the flip key 89070-06790 · no shell, no blade, no transponder

Board Only
Supply form
4-Button
Lock, Unlock, Trunk, Panic
315 MHz
Frequency
HYQ12BFB
FCC ID

⭐ This is the remote board only, taken out of a genuine Toyota four-button flip key that carries FCC ID HYQ12BFB and runs at 315 MHz. It is the transmitter side of the key on the part number 89070-06790, fitted to the Camry on the keyed ignition trims and to the Corolla from 2020. What ships is the circuit board: no housing, no button pad, no key blade, no battery and no transponder. The 8A immobiliser device of this key sits in the key head as a separate part, not on this board, so the chip has to come across from the key being rebuilt or be ordered on its own. Supplied as a used factory board.

⚙️ Key features

Board only, nothing else

The transmitter board out of the flip key, for a rebuild where the housing and the cut blade are still good.

315 MHz on HYQ12BFB

The US-band transmitter of this key family, identified by the grant marking rather than by the shell shape.

Four-button layout

Lock, unlock, trunk and panic, the pad this board was built for on the flip key 89070-06790.

Factory Toyota board

A genuine board pulled from a complete key rather than a generated universal or a copy module.

💎 Benefits

Cheaper than a complete key

A soaked or cracked board is replaced without paying again for a housing, a pad and a cut blade.

Bench spare for diagnosis

Keeps a known working 315 MHz board on the shelf to prove out a suspect customer key in minutes.

Keeps the cut blade in service

The existing blade stays in the customer housing, so the repair needs no cutting and no code lookup.

Counter-level rebuild

The board drops into the sound housing at the bench and goes straight onto the tool for registration.

👥 Who it's for

Automotive locksmiths

Rebuilding a Toyota flip key where the electronics failed and the housing and blade are worth keeping.

Key shops and counter trade

Offering a board-level repair instead of selling a whole key for a dead transmitter.

Bench and diagnostic work

Substituting a good board to separate a transmitter fault from an entry module fault on the car.

Used car dealers and garages

Returning a flip key to service without ordering a complete replacement key from the dealer.

🚘 Compatible vehicles

TOYOTACamry2018-2022keyed ignition trims, four-button flip key
TOYOTACorolla2020-2022keyed ignition trims, four-button flip key
Open the customer key and match HYQ12BFB on the board, the four-button pad and the board outline before ordering. Cars with a push-to-start button take a smart key and never this board.

📦 What's included

✅ IN THE BOX

✔ 1 x genuine Toyota four-button remote key board, 315 MHz, marked HYQ12BFB, used

❌ NOT INCLUDED

✘ Housing or shell - the board goes into the customer housing or a shell ordered separately

✘ Button pad - the rubber pad stays with the housing being reused

✘ Key blade - the existing cut blade stays with the customer key

✘ Transponder - the 8A device is not on this board and is moved across or ordered separately

✘ Battery - fit a fresh cell of the size the housing takes

✘ Programming - the board is registered to the car through the diagnostic port

📋 Specifications

📡 REMOTE
FCC ID
HYQ12BFB
Frequency
315 MHz
Buttons
4-button (Lock, Unlock, Trunk, Panic)
Supply form
Board only, circuit board
💾 TRANSPONDER
On this board
None fitted
Device the car expects
8A (H) DST-AES
Where it sits
Separate device in the key head
🔑 FITS MAIN KEY
Main key part number
89070-06790
Keyway on the main key
TOY48
Main key format
Flip remote key
📦 PHYSICAL
Condition
Genuine · OEM · Used
Quantity
1 piece

🛠️ Programming instructions

OBD REGISTRATION - REMOTE SIDE
1Fit the board into the housing with the pad, the blade and a fresh cell, and check each button moves freely before the car sees it.
2Plug the tool into the OBD-II port and read the vehicle out, then open the Toyota key registration menu for the keyed ignition build.
3Run the routine with a working key present where the tool offers it, which is the shorter path on this immobiliser generation.
4Register the remote side so the buttons operate the doors and the boot, then road test lock, unlock, trunk and panic at range.
5Where the vehicle is all keys lost, use the dedicated Toyota routine in the tool rather than the standard add-key path.
THE IMMOBILISER SIDE IS A SEPARATE JOB
The chip is not here: the car will not crank on the remote board alone. An 8A device has to be in the key head, either the one out of the key being rebuilt or a new one.
Tools that list this work: Autel IM508 and IM608, Xhorse VVDI Key Tool Plus, Lonsdor K518 and OBDSTAR key programmers publish Toyota 8A key registration coverage.
Order of work: register the transponder first so the engine starts, then check the button functions, because a car that starts on a dead remote is easier to hand back.
Check coverage first: the menu path, the wait timer and the step order depend on the tool brand and the software version. Verify the vehicle sits in the tool's supported list before the job.

Frequently Asked Questions

Common questions about this product

The remote board only: the transmitter out of a genuine Toyota four-button flip key marked HYQ12BFB. No housing, no button pad, no key blade, no battery and no transponder are supplied, so the board goes into a shell already on the bench.
No. The 8A device the immobiliser reads sits in the key head as a separate part on this key, so the chip out of the key being rebuilt moves across, or a new 8A transponder is ordered and registered separately.
No. That Toyota number covers the complete flip key this board came out of, blade and housing included. A customer quoting it is describing the finished key, while this listing covers the transmitter electronics on their own. Order the shell, the pad and the blade separately.
Camry from 2018 to 2022 and Corolla from 2020 to 2022, on the keyed ignition trims that use a four-button flip key. Match the grant marking HYQ12BFB and the four-button pad on the customer original before ordering. Trim decides it.
No. Those trims run a smart key with proximity entry and a different board entirely. This part belongs to the versions where the driver turns a key in the ignition barrel, so check the dashboard before ordering a board for the job.
Through the OBD-II port with a key programming tool, in the Toyota registration menu for the keyed ignition build. Autel IM508 and IM608, Xhorse VVDI Key Tool Plus, Lonsdor K518 and OBDSTAR units publish coverage for this work. Software version decides the path.
It has to be the matching four-button housing for this key family. Compare the board outline, the pad footprint and the blade mount against the shell before fitting, because a housing that looks close will not close on a board of the wrong outline.
A genuine factory board pulled from a used key and sold as it comes, so it holds a previously learned identity and has to be registered again to the car it goes on. Test the buttons on the bench after the rebuild.

Last updated: 6 November 2026