Skip to content
  1. Home
  2. Remote and Key Shell
  3. Remote Key Shell
  4. Volkswagen Golf Mk4 / Passat B5 2001–2005 Flip Remote Key Shell - 3-button · HU66 Blade Included - Aftermarket
Volkswagen Golf Mk4 / Passat B5 2001–2005 Flip Remote Key Shell - 3-button · HU66 Blade Included - Aftermarket

Volkswagen Golf Mk4 / Passat B5 2001–2005 Flip Remote Key Shell - 3-button · HU66 Blade Included - Aftermarket

Aftermarket

SKU: B04202

$2.25
AED  8.00

Fits Volkswagen Golf 2001–2005 ·

In Stock

Specifications

Replacement three-button flip housing with an uncut HU66 blade for the Volkswagen 1J0 959 753 AK key. Shell only, no electronics.

Money-back protection:
Claim a refund if your order doesn't ship, is missing, or arrives with product issues
Aftermarket · New

Volkswagen 2001–2005 Flip Remote Key Shell - 3-Button, HU66

3-button · aftermarket replacement shell · no electronics, chip, or blade · HU66 profile · replaces 1J0 959 753 AK

3
Buttons
HU66
Blade profile
No
Electronics
Replaces
1J0 959 753 AK

⭐ This is a replacement housing for the three-button Volkswagen flip key built on part number 1J0 959 753 AK. It supplies both housing halves, the button pad and the uncut HU66 blade with its hinge and spring, and the customer's own board and transponder are transferred into it. It is the repair route for a split housing or a failed hinge where the electronics still work.

⚙️ Key features

Direct-fit replacement housing

Moulded to match the 1J0 959 753 AK Volkswagen key so the original board, buttons, and blade transfer straight across without modification.

Restores a failed shell, not the electronics

Fixes the common failure - cracked case, worn button membrane, snapped blade slot - while the customer keeps their already-programmed electronics, so no key programming is needed.

Uncut HU66 blade included

Ships with an uncut HU66 blade, cut to the customer's key code or copied from the original before assembly.

💎 Benefits

Lower cost than a full key

Reusing the customer's working electronics turns a cracked Volkswagen key into a shell swap instead of a new-key-and-programming job, protecting margin on a common repair.

No reprogramming downtime

Because the programmed board and chip carry over, the repaired key works the moment it's reassembled - a while-you-wait counter job rather than a bench programming session.

Low-cost stock line

A cheap, fast-moving spare for any shop already seeing Volkswagen keys with cracked cases or worn buttons, with no license or tool dependency to hold it.

👥 Who it's for

Automotive locksmiths

Locksmiths refreshing worn or cracked Volkswagen keys as a quick counter repair.

Key shops

Shops offering while-you-wait Volkswagen shell swaps without touching the programmed electronics.

Garages and used-car dealers

Garages and dealers tidying up Volkswagen keys on trade-in or workshop stock.

🚗 Compatible vehicles

VOLKSWAGEN Golf Mk4, Passat B5, Beetle and Polo on the three-button 1J0 959 753 AK flip key, roughly 2001–2005 -
Coverage follows the 1J0 959 753 AK donor. Sibling suffixes on the same base number carry different button counts and market bands, so match the suffix and the button count on the customer's original key before ordering.

📦 What's included

✅ IN THE BOX

✔ Volkswagen flip remote key shell (3-button) - empty housing

✔ Button pad / key back as moulded

✔ 1 x uncut HU66 blade

❌ NOT INCLUDED

✘ Transponder chip - transfer from the customer's original key

✘ Circuit board / remote electronics - transfer from the original

✘ Battery - reuse or replace separately

📋 Specifications

🧰 SHELL
Type
Flip Remote Key Shell
Buttons
3
Blade profile
HU66 (blade sold separately)
Part number
1J0 959 753 AK
Hella type reference
5FA 008 399-50 - a Hella internal type number printed on this key family. It is not an FCC ID and no radio grant is issued against it.
Sibling references
The same Hella 5FA 008 399 type family carries the -00 and -10 suffixes on the neighbouring 1J0 959 753 AG and AH keys
🚗 FITMENT
Make
Volkswagen
Vehicles
Golf Mk4 / Passat B5 / Beetle / Polo
Years
2001–2005
Function
Remote key
📦 PHYSICAL
Contents
Empty shell - no electronics
Condition
New, aftermarket
Chip
None - not included
Weight
40 g

🔧 Shell replacement - how to fit

🔑SHELL REPLACEMENT - TRANSFER YOUR PARTS

This is an empty replacement housing - it carries no electronics. Transfer the working parts from the customer's original Volkswagen key into it; no reprogramming is needed when those parts are reused.

Open the original key split the customer's original Volkswagen key and remove the circuit board, transponder chip, and battery.
Transfer the parts seat the board, chip, and battery into the new housing, then fit the button pad.
Fit the blade and test cut a HU66-profile blade to the original bitting (or copy the old blade), fit it, then test every button and the immobiliser.
Verify coverage first: no reprogramming is needed when the original programmed electronics are reused; a new key and programming are only required if the customer's original board or chip is lost or destroyed.

Frequently Asked Questions

Common questions about this product

Both housing halves, the three-button rubber pad and one uncut HU66 blade with its hinge and spring fitted. No board, no transponder and no battery are supplied - the electronics from the customer's original key are transferred across.
No. That string is a Hella internal type reference printed on this key family, and no radio grant is issued against it. It is useful for matching the right housing variant, but it should never be quoted as a compliance approval for the part.
It is sized for a HU66-profile blade, sold separately. Cut the HU66 blade to the customer's original bitting or copy the old blade, then fit it into the housing before returning the finished Volkswagen key to the customer.
It replaces the 1J0 959 753 AK Volkswagen key fitted to 2001–2005 models. Match that Part number and the HU66 blade profile against the customer's original before ordering, since a single vehicle family can span several different shells across trims and years.
No. It is an aftermarket replacement housing, not a genuine Volkswagen-branded component. It is intended as a cost-effective shell swap for a cracked or worn key, reusing the customer's own programmed electronics rather than replacing the complete key assembly.
No. This flip remote key shell ships as an empty housing with no battery fitted. Reuse the battery from the customer's original key or fit a fresh coin cell of the same type when transferring the electronics across into the new shell.
Yes. Fitting is a mechanical shell swap - open the original Volkswagen key, move the board and chip across, fit a blade, and test. No programmer or license is required as long as the original electronics are reused.

Last updated: 10 November 2026