Skip to content

Nissan Versa 2007–2009 Key Fob & Car Keys

Keys that fit the 2007–2009 Nissan Versa: smart keys, flip keys and remote keys, 2, 3 or 4 buttons, FCC ID KBRASTU15, CWTWBU729 or CWTWB1U733, NXP PCF7936AA or ID46 (HITAG 2) chip, 315 MHz. 14 compatible keys, remotes & shells (genuine and aftermarket) available for the 2007 Nissan Versa.

Last updated: 17 November 2026

Key specifications for the Nissan Versa 2007–2009

Key types
smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
315 MHz
Buttons
2-, 3- and 4-button
Transponder chip
NXP PCF7936AA · ID46 (HITAG 2) · In the emergency insert key, not included · Not in the fob; the ignition key carries the chip · CN3 cloning chip
Blade profile
NSN14
Part numbers
28268-C991C · 28268-EA00A · H0561-3AA0B · H0561-C993A
Battery
CR2025

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Nissan parts catalogue, with the specifications on each listing. Every remote listed for the Nissan Versa 2007–2009 transmits on 315 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Nissan Versa 2007 key

Smart key (push to start)

2 tools list this key. 2 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    PIN read function

Key with a blade (regular or flip)

4 tools list this key. 4 of them list all keys lost.

  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    PIN read function
  • Advanced Diagnostics AD100 Pro / MVP Pro
    • Add key(US / Canada cars)
    • All keys lost(US / Canada cars)
  • Advanced Diagnostics Smart Pro
    • Add key(US / Canada cars)
    • All keys lost(US / Canada cars)
  • OBDSTAR Key Master G3
    • All keys lost
    • Remote
    reads the PIN by OBD

Programming steps

Add key - Advanced Diagnostics Smart Pro / MVP Pro (Nissan CAN keyed ignition)(US / Canada cars)

Needs: working key (any one, to switch ON), PIN read by OBD (BCM code converted to 4-digit PIN by the tool), every key the customer keeps

  1. Gather every key the customer keeps; cut the new ID46 key so it turns the ignition.
  2. Connect by OBD and select Nissan > Versa (keyed ignition, CAN / NATS 5) > program keys.
  3. Switch ON with a key in the barrel; the tool reads the BCM code by OBD and converts it to the 4-digit PIN (newer conversion on about 2009-on cars).
  4. Confirm programming; the BCM clears its stored keys at this point.
  5. With the key in the barrel, switch ON for about 8 seconds, then OFF and remove it.
  6. Insert the next key (new or existing), ON for about 8 seconds, OFF, remove; repeat for up to 4 keys.
  7. Close the session: switch ON again with the first key for about 8 seconds, then OFF.
  8. Start the engine with every key; program the remote buttons on board (separate case) if they do not work.
Watch out: Programming clears the stored keys: any key not registered in the same session stops starting the car. Plan for 4 keys at most (tool guides say 4; some references allow 5 on these BCMs).
All keys lost - Advanced Diagnostics Smart Pro / MVP Pro (Nissan CAN keyed ignition)(US / Canada cars)

Needs: new keys cut to the lock (code or decode), PIN read by OBD (BCM code converted to 4-digit PIN by the tool)

  1. Cut two or more new ID46 keys to the lock (code or decode) so they turn the ignition.
  2. Connect by OBD and select Nissan > Versa (keyed ignition, CAN / NATS 5) > program keys.
  3. Switch ON with a new key; the tool reads the BCM code and works out the 4-digit PIN (no working key needed).
  4. Confirm programming; the BCM clears all stored keys, the lost ones included.
  5. Key in, ON for about 8 seconds, OFF, remove; repeat with each new key (up to 4).
  6. Close the session: switch ON again with the first key for about 8 seconds, then OFF.
  7. Start the engine with every key, then program the remote buttons if they do not work.
Watch out: Bring at least two keys: the lost keys are erased and only the keys programmed now will start the car. If the tool offers an 'old' and a 'new' PIN conversion, later BCMs (about 2009 on) use the new one.

Without a tool

The remote is programmed on the car, without a tool.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: every remote the customer keeps

  1. Close all doors and lock them with the driver's power lock switch.
  2. Insert the key and pull it fully out at least 6 times within 10 seconds. The hazard lamps flash when it worked.
  3. Insert the key and turn it to ACC.
  4. Within 5 seconds, press any button on the remote once. The hazard lamps flash.
  5. For each remaining remote, old ones included: unlock then lock with the driver's power lock switch, and within 5 seconds press any button on the next remote once. The hazard lamps flash.
  6. Turn the key OFF and remove it, unlock with the driver's power lock switch and open the driver's door.
Watch out: Programming erases every stored remote: have all remotes on hand and program them all. Press the remote button only once; a second press makes the programming fail. Pull the key fully out each time; going too fast will not enter programming mode.

When the key changed

Smart key (push to start)

  • 2007 - 2019This yearChip: ID46315 MHzFCC: CWTWBU729, CWTWB1U840, CWTWB1U808(US / Canada cars)CWTWB1U808 is the Versa Note key
  • 2020 - 2025Chip: 4A433 MHzFCC: KR5TXN1, KR5TXN4, KR5TXPZ1

Key with a blade (regular or flip)

  • 2007 - 2019This yearChip: ID46FCC: CWTWB1U751(US / Canada cars)Separate remote to about 2011, remote head key after
  • 2021 - 2024Chip: 4A433 MHzFCC: CWTWB1G767(US / Canada cars)Flip key (H0561-5EF0C) on keyed-ignition trims

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Nissan Versa 2007–2009?

14 listings fit the Nissan Versa 2007–2009: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2-, 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Nissan Versa 2007–2009 remote use?

Every remote listed for the Nissan Versa 2007–2009 transmits on 315 MHz.

Which transponder chip does the Nissan Versa 2007–2009 key use?

The listings for this car carry: NXP PCF7936AA · ID46 (HITAG 2) · In the emergency insert key, not included · Not in the fob; the ignition key carries the chip · CN3 cloning chip. Check the chip in each listing's specifications.

Which FCC IDs do Nissan Versa 2007–2009 remotes carry?

The remotes listed for this car carry FCC ID CWTWB1U733, CWTWB1U751, CWTWBU729 and KBRASTU15. Match it with the FCC ID printed on your original remote.

Which blade profile does the Nissan Versa 2007–2009 key use?

The blades listed for this car: NSN14.

Which tools program a Nissan Versa 2007–2009 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Advanced Diagnostics AD100 Pro / MVP Pro and Advanced Diagnostics Smart Pro for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Nissan Versa 2007–2009 remote be programmed without a tool?

The remote is programmed on the car, without a tool.