Toyota Camry 2018 Key Fob & Car Keys
Keys that fit the 2018 Toyota Camry: smart keys, flip keys and remote keys, 2, 3 or 4 buttons, FCC ID HYQ12BFB, HYQ14FBC or BR2EX, 8A+4D or 8A (H-chip) chip, 314 MHz, 315 MHz or 433 MHz. 30 compatible keys, remotes & shells (genuine and aftermarket) available for the 2018 Toyota Camry.
Last updated: 17 November 2026
Key specifications for the Toyota Camry 2018
- Key types
- smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
- Frequency
- 314 MHz, 315 MHz and 433 MHz
- Buttons
- 2-, 3- and 4-button
- Transponder chip
- 8A+4D · 8A (H-chip) · TRPWS21
- Blade profile
- TOY48 · TOY51 · LXP90 · TOY43
- Part numbers
- 89904-33770 · 89070-06421 / 89070-02880 · 89070-02B40 · 89904-33550 · 89070-06790 / 89070-06791 · 89070-33F20 / 89070-33F21 · 89070-02880 / 89070-02882
- Battery
- CR2032
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 314 MHz, 315 MHz and 433 MHz against your original before ordering.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- Lonsdor Super ADP 8A/4A Adapter for Toyota Lexus 2013-2021 Smart Key Programming - K518 Series
SKU: B04763
$182.58$210.67In Stock - $0.42In Stock
- $3.65In Stock
- $35.11In Stock
- $49.16In Stock
- $21.07In Stock
- Toyota Camry Corolla Flip Remote Key 4-button 315MHz - 89070-06790 HYQ12BFB H Chip TOY48
SKU: MB00026
$14.04In Stock - Toyota XSTO01EN Smart Key Shell 2-Button for Xhorse Board with TOY48 Blade - Aftermarket · New
SKU: B02568
$2.81In Stock - Toyota Camry 2018-2024 Smart Key Zinc Alloy Leather Key Case 3+1-button - Fits Key 89904-06220
SKU: B09011
$6.19Out of Stock - $162.92Out of Stock
- $42.13Out of Stock
Programming the Toyota Camry 2018 key
Smart key (push to start)
7 tools list this key. 7 of them list all keys lost.
- Advanced Diagnostics Smart Pro
- Add key
- All keys lost
- Remote
online calculationNeeds: AD ADC2000B cable - OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
- Add key
- All keys lost
- Add key
- All keys lost
- Add key
- All keys lost
- Universal key
no PIN needed- Add key
- All keys lost
- Universal key
no PIN needed- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
Programming steps
Add key - Autel MaxiIM IM508 / IM608
Needs: working smart key, new smart key, internet connection
- IMMO > Toyota > select the model > Smart key > (8A) > Control unit > Keyless system (CAN) > Back up IMMO data, by OBD, and save the file.
- Add smart key: load the file, switch on, follow the prompts (ignition off, hazards on).
- Working key to the Start button until one beep, then the new key until two beeps.
- Switch on, touch a learned key to the Start button, then test start and remote.
Add key - Lonsdor K518ISE / K518S / K518 Pro
Needs: working smart key, Lonsdor Super ADP 8A/4A adapter when the OBD backup fails, new smart key, internet connection
- Immo & Remote > Toyota > Select from type > All smart key lost (2016-) > 8A or 4A > Backup immo data, by OBD or with the ADP adapter on the smart box; save the data.
- Add smart key: switch on with the working key, then ignition off and hazards on when asked; load the saved data.
- Working key to the Start button until one beep, then within 30 s the new key until two beeps.
- Switch on, touch a programmed key to the Start button, then test start and remote.
Add key - Xhorse VVDI Key Tool Plus
Needs: working smart key, Xhorse XD8ASKGL Toyota 8A smart key adapter (TOY-C1 / TOY-C2 cables), new smart key (OEM or Xhorse XM38), internet connection
- Identify the original key type (8A or 4A) with the Key Tool Plus.
- Connect OBD > Key Tool Plus OBD cable > XD8ASKGL adapter > tablet; connect the smart box to the adapter with the TOY-C1 or TOY-C2 cable that fits its plug.
- Toyota immo menu > Backup smart box EEPROM data (online); save the file, then refit the smart box plug.
- Add smart key: switch on, then off, hazards on; load the saved file. The tool shows registered and free positions.
- Working key to the Start button until it beeps, then each new key in turn until it beeps.
- Switch on and test start and remote of every key.
All keys lost - Autel MaxiIM IM508 / IM608
Needs: APB112 smart key simulator, XP400 (IM508), new smart key, internet connection, no PIN entry
- IMMO > Toyota > select the model > Smart key > (8A) > Control unit > Keyless system (CAN) > Back up IMMO data. Use the VCI on USB, not Bluetooth.
- With the ignition off, turn the hazard lights on and off once and press Start 5 times when asked; back up by OBD and save the EEPROM file.
- Generate analog key: load the file, connect the APB112, keep it powered and near the Start button, press Start and follow the prompts until it is generated.
- Add smart key: load the same file, switch on, enter the VIN, switch off and turn the hazards on.
- APB112 to the Start button until one beep, then the new key until two beeps.
- Switch on, touch a learned key to the Start button, then test start and remote.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro
Needs: LKE emulator (K518ISE / K518S), Lonsdor Super ADP 8A/4A adapter when the OBD backup fails, new smart key (OEM or Lonsdor FT key), internet connection, no PIN from the dealer (the 12-digit code is derived from the backup)
- Bind the LKE emulator to the K518ISE / K518S (the K518 Pro generates the emergency key without an LKE).
- Immo & Remote > Toyota > Select from type > All smart key lost (2016-) > 8A or 4A > Backup immo data. Try by OBD first; if it fails, connect the ADP adapter between the smart box and its harness.
- Turn the hazard lights on when asked, enter the VIN if asked, let the tool calculate online and save the data.
- Refit the smart box plug, connect by OBD, put the LKE in the card slot and generate the emergency key from the saved data.
- Add smart key: switch on with the LKE at the Start button, then ignition off and hazards on when asked; load the saved data.
- Registered key (LKE) to the Start button until one beep, then within 30 s the new key until two beeps.
- Switch on and touch a programmed key to the Start button (one beep), then test start and remote.
- Delete lost keys with Delete smart key if the customer wants them gone.
Key with a blade (regular or flip)
8 tools list this key. 7 of them list all keys lost.
- Advanced Diagnostics Smart Pro
- Add key
- All keys lost
- Remote
online calculationNeeds: AD ADC2000B cable - Launch X-431 IMMO
- Add key
- All keys lost
- Remote
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
- Add key
- All keys lost
- Universal key
- Add key
- All keys lost
- Universal key
- Xhorse VVDI2
- All keys lost(non-US cars)
- Lonsdor KH100
- Remote
Programming steps
All keys lost - Xhorse VVDI2 / VVDI Key Tool Max + Mini OBD / Key Tool Plus(GCC / Europe cars)
Needs: Xhorse Toyota 8A non-smart key all-keys-lost adapter (one adapter binds to one device), new H (8A) key cut to the car, internet connection (server calculation)
- Update the device. Disconnect the battery negative before wiring.
- Connect the adapter as the Xhorse guide shows for the car: fuse-box plug, ignition (lock) plug after unplugging the original, OBD, then the battery clamps.
- Toyota 8A immobilizer menu: run Immobox (8A) all key lost - OBD, make master key directly, with the new key in the device coil.
- Wait for the online calculation; the device writes a master key that starts the car.
- Disconnect every cable and restore the original fuses and plugs before you start the car.
- Test the new key; add more keys with the normal OBD add-key function.
Key type not stated by the list
One tool lists this key.
- Add key
- All keys lost
- Remote
- Universal key
Without a tool
The remote is not programmed on the car by hand: it needs a tool or a dealer.
When the key changed
Smart key (push to start)
- 2007 - 2011Chip: 4D315 MHzFCC: HYQ14AAB(US / Canada cars)Push-to-start trims only
- 2012 - 2024This yearChip: 8A315 MHzFCC: HYQ14FBA, HYQ14FBC, HYQ14FLA(US / Canada cars)FCC id changes in 2018 (FBA to FBC / FLA)
- 2013 - 2020This yearChip: 8A433 MHz(GCC / Europe cars)
- from 2025Chip: 4A315 MHzFCC: HYQ14FBW(US / Canada cars)
Key with a blade (regular or flip)
- 1998 - 2002Chip: 4CBlade: TOY432003-2004 cars may still be 4C; read the chip
- 2003 - 2010Chip: 4D-67Blade: TOY43(US / Canada cars)Overlap years may be 4D-67 or G; G is stamped on the blade
- 2006 - 2010Chip: 4D-67Blade: TOY43(GCC / Europe cars)
- 2011 - 2014Chip: GBlade: TOY43(US / Canada cars)Overlap years may be 4D-67 or G; G is stamped on the blade
- 2012 - 2015Chip: G433 MHz(GCC / Europe cars)
- 2015 - 2023This yearChip: H (8A)315 MHzFCC: HYQ12BDM, HYQ12BFB(US / Canada cars)Overlap years may be G or H; check the letter on the blade
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Toyota Camry 2018?
30 listings fit the Toyota Camry 2018: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2-, 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Toyota Camry 2018 remote use?
Listings for the Toyota Camry 2018 come in 314 MHz, 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.
Which transponder chip does the Toyota Camry 2018 key use?
The listings for this car carry: 8A+4D · 8A (H-chip) · TRPWS21. Check the chip in each listing's specifications.
Which FCC IDs do Toyota Camry 2018 remotes carry?
The remotes listed for this car carry FCC ID B2U2K2R, B74TA, BR2EX, HYQ12BEL, HYQ12BFB, HYQ14FBC and HYQ14FBN. Match it with the FCC ID printed on your original remote.
Which blade profile does the Toyota Camry 2018 key use?
The blades listed for this car: TOY48 · TOY51 · LXP90 · TOY43.
Which tools program a Toyota Camry 2018 key?
The tool makers' coverage lists name Advanced Diagnostics Smart Pro, OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, Lonsdor K518, Xhorse VVDI Key Tool Max and Xhorse VVDI Key Tool Plus for this car; 6 of them list all keys lost. Check your tool's latest coverage list before the job.
Can the Toyota Camry 2018 remote be programmed without a tool?
The remote is not programmed on the car by hand: it needs a tool or a dealer.





























