Skip to content

Toyota RAV4 2021 Key Fob & Car Keys

Keys that fit the 2021 Toyota RAV4: smart keys, flip keys and remote keys, 2, 3 or 4 buttons, FCC ID GQ473T, HYQ14FBC or HYQ14FBX, 8A (H-chip) or 4A (HITAG AES) chip, 314 MHz, 315 MHz or 433 MHz. 23 compatible keys, remotes & shells (genuine and aftermarket) available for the 2021 Toyota RAV4.

Last updated: 17 November 2026

Key specifications for the Toyota RAV4 2021

Key types
smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
314 MHz, 315 MHz and 433 MHz
Buttons
2-, 3-, 4- and 5-button
Transponder chip
8A (H-chip) · 4A (HITAG AES) · TRPWS21
Blade profile
TOY48 · TOY51
Part numbers
8990H-60401 · 8990H-K0050 · 8990H-42030 · 89070-0R300 · 8990H-42190 / 8990H-42191 · 8990H-42170

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 314 MHz, 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Toyota RAV4 2021 key

Smart key (push to start)

7 tools list this key. 7 of them list all keys lost.

Programming steps

Add key - Autel MaxiIM IM508 / IM608

Needs: working smart key, new smart key, internet connection

  1. IMMO > Toyota > select the model > Smart key > (8A) > Control unit > Keyless system (CAN) > Back up IMMO data, by OBD, and save the file.
  2. Add smart key: load the file, switch on, follow the prompts (ignition off, hazards on).
  3. Working key to the Start button until one beep, then the new key until two beeps.
  4. Switch on, touch a learned key to the Start button, then test start and remote.
Watch out: Bring every key the customer keeps; check the remote buttons on each after programming. The smart box has 5 key positions in the worked examples; erase unused keys if it is full.
Add key - Lonsdor K518ISE / K518S / K518 Pro

Needs: working smart key, Lonsdor Super ADP 8A/4A adapter when the OBD backup fails, new smart key, internet connection

  1. Immo & Remote > Toyota > Select from type > All smart key lost (2016-) > 8A or 4A > Backup immo data, by OBD or with the ADP adapter on the smart box; save the data.
  2. Add smart key: switch on with the working key, then ignition off and hazards on when asked; load the saved data.
  3. Working key to the Start button until one beep, then within 30 s the new key until two beeps.
  4. Switch on, touch a programmed key to the Start button, then test start and remote.
Watch out: Bring every key the customer keeps; check the remote buttons on each after programming. The smart box has 5 key positions in the worked examples; erase unused keys if it is full.
Add key - Xhorse VVDI Key Tool Plus

Needs: working smart key, Xhorse XD8ASKGL Toyota 8A smart key adapter (TOY-C1 / TOY-C2 cables), new smart key (OEM or Xhorse XM38), internet connection

  1. Identify the original key type (8A or 4A) with the Key Tool Plus.
  2. Connect OBD > Key Tool Plus OBD cable > XD8ASKGL adapter > tablet; connect the smart box to the adapter with the TOY-C1 or TOY-C2 cable that fits its plug.
  3. Toyota immo menu > Backup smart box EEPROM data (online); save the file, then refit the smart box plug.
  4. Add smart key: switch on, then off, hazards on; load the saved file. The tool shows registered and free positions.
  5. Working key to the Start button until it beeps, then each new key in turn until it beeps.
  6. Switch on and test start and remote of every key.
Watch out: Bring every key the customer keeps; check the remote buttons on each after programming. The smart box has 5 key positions in the worked examples; erase unused keys if it is full.
All keys lost - Autel MaxiIM IM508 / IM608

Needs: APB112 smart key simulator, XP400 (IM508), new smart key, internet connection, no PIN entry

  1. IMMO > Toyota > select the model > Smart key > (8A) > Control unit > Keyless system (CAN) > Back up IMMO data. Use the VCI on USB, not Bluetooth.
  2. With the ignition off, turn the hazard lights on and off once and press Start 5 times when asked; back up by OBD and save the EEPROM file.
  3. Generate analog key: load the file, connect the APB112, keep it powered and near the Start button, press Start and follow the prompts until it is generated.
  4. Add smart key: load the same file, switch on, enter the VIN, switch off and turn the hazards on.
  5. APB112 to the Start button until one beep, then the new key until two beeps.
  6. Switch on, touch a learned key to the Start button, then test start and remote.
Watch out: The car battery must be charged; the data backup needs an internet connection. The simulator / emulator is erased if you use the device for another key job before adding the key: add the new key straight after generating it. The smart box has 5 key positions in the worked examples; erase unused keys if it is full. Keep the APB112 powered the whole time: the analog key is lost if it loses power.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro

Needs: LKE emulator (K518ISE / K518S), Lonsdor Super ADP 8A/4A adapter when the OBD backup fails, new smart key (OEM or Lonsdor FT key), internet connection, no PIN from the dealer (the 12-digit code is derived from the backup)

  1. Bind the LKE emulator to the K518ISE / K518S (the K518 Pro generates the emergency key without an LKE).
  2. Immo & Remote > Toyota > Select from type > All smart key lost (2016-) > 8A or 4A > Backup immo data. Try by OBD first; if it fails, connect the ADP adapter between the smart box and its harness.
  3. Turn the hazard lights on when asked, enter the VIN if asked, let the tool calculate online and save the data.
  4. Refit the smart box plug, connect by OBD, put the LKE in the card slot and generate the emergency key from the saved data.
  5. Add smart key: switch on with the LKE at the Start button, then ignition off and hazards on when asked; load the saved data.
  6. Registered key (LKE) to the Start button until one beep, then within 30 s the new key until two beeps.
  7. Switch on and touch a programmed key to the Start button (one beep), then test start and remote.
  8. Delete lost keys with Delete smart key if the customer wants them gone.
Watch out: The car battery must be charged; the data backup needs an internet connection. The simulator / emulator is erased if you use the device for another key job before adding the key: add the new key straight after generating it. The smart box has 5 key positions in the worked examples; erase unused keys if it is full. The ADP adapter is bound to one K518 for good.

Key with a blade (regular or flip)

8 tools list this key. 6 of them list all keys lost.

All keys lost is listed by Launch X-431 IMMO, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Lonsdor K518, Xhorse VVDI Key Tool Max and Xhorse VVDI Key Tool Plus. Advanced Diagnostics AD100 Pro / MVP Pro lists add key only.

Key type not stated by the list

One tool lists this key.

When the key changed

Smart key (push to start)

  • 2009 - 2012Chip: 4D315 MHzFCC: HYQ14AAB, HYQ14AEM(US / Canada cars)Push-start trims only
  • 2013 - 2022This yearChip: 8A433 MHz(GCC / Europe cars)Two key types: BA2EQ to 2018, B2T2K2R from late 2018
  • 2013 - 2025This yearChip: 8A315 MHzFCC: HYQ14FBA, HYQ14FBC, HYQ14FLA, HYQ14FBX(US / Canada cars)HYQ14FBA to 2018, page AA 2019-2021, page BA from 2022

Key with a blade (regular or flip)

  • 2000 - 2003Chip: 4C(GCC / Europe cars)
  • 2005 - 2009Chip: 4D-67Blade: TOY43(US / Canada cars)Overlap years may be 4D-67 or G; G is stamped on the blade
  • 2006 - 2009Chip: 4D-67(GCC / Europe cars)
  • 2010 - 2012Chip: GBlade: TOY43(US / Canada cars)Overlap years may be 4D-67 or G; G is stamped on the blade
  • 2013 - 2024This yearChip: H (8A)315 MHzBlade: TOY43FCC: GQ4-52T, HYQ12BDM, GQ4-73T(US / Canada cars)Remote head key to 2018, flip key from 2019

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Toyota RAV4 2021?

23 listings fit the Toyota RAV4 2021: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2-, 3-, 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Toyota RAV4 2021 remote use?

Listings for the Toyota RAV4 2021 come in 314 MHz, 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Toyota RAV4 2021 key use?

The listings for this car carry: 8A (H-chip) · 4A (HITAG AES) · TRPWS21. Check the chip in each listing's specifications.

Which FCC IDs do Toyota RAV4 2021 remotes carry?

The remotes listed for this car carry FCC ID B2T2K2R, B3H2K2R, B3N2K2R, GQ473T, HYQ14FBC, HYQ14FBX and HYQ14FLA. Match it with the FCC ID printed on your original remote.

Which blade profile does the Toyota RAV4 2021 key use?

The blades listed for this car: TOY48 · TOY51.

Which tools program a Toyota RAV4 2021 key?

The tool makers' coverage lists name Advanced Diagnostics Smart Pro, OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, Lonsdor K518, Xhorse VVDI Key Tool Max and Xhorse VVDI Key Tool Plus for this car; 6 of them list all keys lost. Check your tool's latest coverage list before the job.