Skip to content

Nissan Quest 2005 Key Fob & Car Keys

Keys that fit the 2004–2006 Nissan Quest: smart keys, flip keys and remote keys, 2, 3 or 4 buttons, FCC ID KBRASTU15, CWTWB1U751 or CWTWB1U733, NXP PCF7936AA or ID46 (HITAG 2) chip, 315 MHz. 9 compatible keys, remotes & shells (genuine and aftermarket) available for the 2005 Nissan Quest.

Last updated: 12 November 2026

Key specifications for the Nissan Quest 2004–2006

Key types
smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
315 MHz
Buttons
2-, 3- and 4-button
Transponder chip
NXP PCF7936AA · ID46 (HITAG 2) · CN3 cloning chip
Blade profile
NSN14
Part numbers
28268-C991C · H0561-3AA0B · 28268-EA00A

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Nissan parts catalogue, with the specifications on each listing. Every remote listed for the Nissan Quest 2004–2006 transmits on 315 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Nissan Quest 2005 key

Key with a blade (regular or flip)

2 tools list this key. 2 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    PIN read function

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key

Without a tool

The remote is programmed on the car, without a tool.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: working ignition key, every remote the customer keeps

  1. Sit inside, close all doors and lock them with the driver's power lock switch.
  2. Insert the key fully and pull it fully out at least 6 times within 10 seconds (about one per second) until the hazard lamps flash.
  3. Insert the key and turn it to ACC.
  4. Within 5 seconds press one button (LOCK) on the first remote once; the hazards flash.
  5. For each further remote, old ones too: unlock then lock with the driver's switch, then within 5 seconds press the next remote once.
  6. Turn the key OFF, remove it, unlock with the driver's switch and open the driver's door to leave the mode; test every remote.
Watch out: Entering this mode erases every remote: re-register the old ones too. Press each remote only once; a second press fails the registration. Remote buttons only: this does not program the immobiliser chip. Keyed-ignition cars only: not for Intelligent Key (push start) cars.

When the key changed

Smart key (push to start)

  • 2011 - 2017Chip: ID46315 MHzFCC: CWTWB1U818, CWTWB1U789(US / Canada cars)Push-start on all trims; last regular model year 2016

Key with a blade (regular or flip)

  • 2004 - 2009This yearChip: ID46(US / Canada cars)First Quest with an immobilizer; 1999-2002 vans have none

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Nissan Quest 2004–2006?

9 listings fit the Nissan Quest 2004–2006: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2-, 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Nissan Quest 2004–2006 remote use?

Every remote listed for the Nissan Quest 2004–2006 transmits on 315 MHz.

Which transponder chip does the Nissan Quest 2004–2006 key use?

The listings for this car carry: NXP PCF7936AA · ID46 (HITAG 2) · CN3 cloning chip. Check the chip in each listing's specifications.

Which FCC IDs do Nissan Quest 2004–2006 remotes carry?

The remotes listed for this car carry FCC ID CWTWB1U733, CWTWB1U751 and KBRASTU15. Match it with the FCC ID printed on your original remote.

Which blade profile does the Nissan Quest 2004–2006 key use?

The blades listed for this car: NSN14.

Which tools program a Nissan Quest 2004–2006 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX and Launch X-431 IMMO for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Nissan Quest 2004–2006 remote be programmed without a tool?

The remote is programmed on the car, without a tool.