Skip to content

Toyota Corolla 2020 Key Fob & Car Keys

Keys that fit the 2020 Toyota Corolla: smart keys, flip keys and remote keys, 2, 3 or 4 buttons, FCC ID HYQ14FBN, HYQ12BFB or B74TA, 4A (HITAG AES) or 8A (H-chip) chip, 312 MHz, 314 MHz or 315 MHz. 40 compatible keys, remotes & shells (genuine and aftermarket) available for the 2020 Toyota Corolla.

Last updated: 17 November 2026

Key specifications for the Toyota Corolla 2020

Key types
smart keys, flip keys, remote keys, key shells, emergency blades and key blanks
Frequency
312 MHz, 314 MHz, 315 MHz and 433 MHz
Buttons
2-, 3- and 4-button
Transponder chip
4A (HITAG AES) · 8A (H-chip) · TRPWS21
Blade profile
TOY48 · TOY43 · TOY51
Part numbers
8990H-12010 · 8990H-K0050 · 89070-02B40 · 89070-02F80 · 8990H-12180 · 89070-06790 / 89070-06791 · 8990H-02050 · 8990H-02030 / 8990H-12010
Battery
CR2032 · CR2016

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Toyota parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 312 MHz, 314 MHz, 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Toyota Corolla 2020 key

Smart key (push to start)

8 tools list this key. 6 of them list all keys lost.

All keys lost is listed by Advanced Diagnostics Smart Pro, OBDSTAR Key Master G3, Lonsdor K518, Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus and XTOOL X100 PAD3 / X100 MAX. Autel IM608 II / IM608 Pro II lists add key only.

Programming steps

Add key - Autel MaxiIM IM508 / IM608

Needs: working smart key, new 4A smart key, G-Box2 / G-Box3 (smart box on the bench or wired at its fuse), internet connection

  1. IMMO > Toyota > Manual selection > Corolla > Smart key > ZRE (2019-) > Control unit > Keyless system (CAN) > Back up IMMO data.
  2. Either remove the smart box and connect it to the G-Box, or wire the G-Box at the smart box fuse as the tool's diagram shows; read and save the EEPROM file.
  3. Refit the smart box. Add smart key: switch on, then ignition off and hazards on; load the saved file.
  4. Working key to the Start button (one beep), then the new key until two beeps; keep it there until learning ends.
  5. Switch on, touch the new key to the Start button (one beep), then test start and remote.
Watch out: Bring every key the customer keeps; check the remote buttons on each after programming. The smart box has 5 key positions in the worked examples; erase unused keys if it is full.
Add key - Lonsdor K518ISE / K518S / K518 Pro

Needs: working smart key, Lonsdor Super ADP 8A/4A adapter when the OBD backup fails, new smart key, internet connection

  1. Immo & Remote > Toyota > Select from type > All smart key lost (2016-) > 8A or 4A > Backup immo data, by OBD or with the ADP adapter on the smart box; save the data.
  2. Add smart key: switch on with the working key, then ignition off and hazards on when asked; load the saved data.
  3. Working key to the Start button until one beep, then within 30 s the new key until two beeps.
  4. Switch on, touch a programmed key to the Start button, then test start and remote.
Watch out: Bring every key the customer keeps; check the remote buttons on each after programming. The smart box has 5 key positions in the worked examples; erase unused keys if it is full.
Add key - Xhorse VVDI Key Tool Plus

Needs: working smart key, Xhorse XD8ASKGL Toyota 8A smart key adapter (TOY-C1 / TOY-C2 cables), new smart key (OEM or Xhorse XM38), internet connection

  1. Identify the original key type (8A or 4A) with the Key Tool Plus.
  2. Connect OBD > Key Tool Plus OBD cable > XD8ASKGL adapter > tablet; connect the smart box to the adapter with the TOY-C1 or TOY-C2 cable that fits its plug.
  3. Toyota immo menu > Backup smart box EEPROM data (online); save the file, then refit the smart box plug.
  4. Add smart key: switch on, then off, hazards on; load the saved file. The tool shows registered and free positions.
  5. Working key to the Start button until it beeps, then each new key in turn until it beeps.
  6. Switch on and test start and remote of every key.
Watch out: Bring every key the customer keeps; check the remote buttons on each after programming. The smart box has 5 key positions in the worked examples; erase unused keys if it is full.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro

Needs: LKE emulator (K518ISE / K518S), Lonsdor Super ADP 8A/4A adapter when the OBD backup fails, new smart key (OEM or Lonsdor FT key), internet connection, no PIN from the dealer (the 12-digit code is derived from the backup)

  1. Bind the LKE emulator to the K518ISE / K518S (the K518 Pro generates the emergency key without an LKE).
  2. Immo & Remote > Toyota > Select from type > All smart key lost (2016-) > 8A or 4A > Backup immo data. Try by OBD first; if it fails, connect the ADP adapter between the smart box and its harness.
  3. Turn the hazard lights on when asked, enter the VIN if asked, let the tool calculate online and save the data.
  4. Refit the smart box plug, connect by OBD, put the LKE in the card slot and generate the emergency key from the saved data.
  5. Add smart key: switch on with the LKE at the Start button, then ignition off and hazards on when asked; load the saved data.
  6. Registered key (LKE) to the Start button until one beep, then within 30 s the new key until two beeps.
  7. Switch on and touch a programmed key to the Start button (one beep), then test start and remote.
  8. Delete lost keys with Delete smart key if the customer wants them gone.
Watch out: The car battery must be charged; the data backup needs an internet connection. The simulator / emulator is erased if you use the device for another key job before adding the key: add the new key straight after generating it. The smart box has 5 key positions in the worked examples; erase unused keys if it is full. The ADP adapter is bound to one K518 for good.

Key with a blade (regular or flip)

9 tools list this key. 6 of them list all keys lost.

All keys lost is listed by Launch X-431 IMMO, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Lonsdor K518, Xhorse VVDI Key Tool Max and Xhorse VVDI Key Tool Plus. Advanced Diagnostics Smart Pro and Advanced Diagnostics AD100 Pro / MVP Pro list add key only.

Key type not stated by the list

One tool lists this key.

When the key changed

Smart key (push to start)

  • 2011 - 2013Chip: 4D315 MHzFCC: HYQ14AAB(US / Canada cars)Push-to-start trims only
  • 2014 - 2019Chip: 8A315 MHzFCC: HYQ14FBA(US / Canada cars)Push-to-start trims only
  • 2019 - 2022This yearChip: 4A433 MHz(GCC / Europe cars)
  • from 2019This yearChip: 4A315 MHzFCC: HYQ14FBN, HYQ14FBW(US / Canada cars)4A type changes about 2023; match FCC id HYQ14FBN or FBW

Key with a blade (regular or flip)

  • 1998 - 2002Chip: 4C(GCC / Europe cars)
  • 2003 - 2010Chip: 4D-67(GCC / Europe cars)
  • 2005 - 2010Chip: 4D-67Blade: TOY43(US / Canada cars)Overlap years may be 4D-67 or G; G is stamped on the blade
  • 2011 - 2013Chip: GBlade: TOY43Overlap years may be 4D-67 or G; G is stamped on the blade
  • 2014 - 2022This yearChip: H (8A)FCC: HYQ12BEL, HYQ12BFBUS remotes 315 MHz, GCC remotes 433 MHz

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Toyota Corolla 2020?

40 listings fit the Toyota Corolla 2020: smart keys, flip keys, remote keys, key shells, emergency blades and key blanks, in 2-, 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Toyota Corolla 2020 remote use?

Listings for the Toyota Corolla 2020 come in 312 MHz, 314 MHz, 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Toyota Corolla 2020 key use?

The listings for this car carry: 4A (HITAG AES) · 8A (H-chip) · TRPWS21. Check the chip in each listing's specifications.

Which FCC IDs do Toyota Corolla 2020 remotes carry?

The remotes listed for this car carry FCC ID B2U2K2R, B3H2K2R, B74TA, BR2EX, HYQ12BFB, HYQ14FBA, HYQ14FBC and HYQ14FBN. Match it with the FCC ID printed on your original remote.

Which blade profile does the Toyota Corolla 2020 key use?

The blades listed for this car: TOY48 · TOY43 · TOY51.

Which tools program a Toyota Corolla 2020 key?

The tool makers' coverage lists name Advanced Diagnostics Smart Pro, OBDSTAR Key Master G3, Lonsdor K518, Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus and XTOOL X100 PAD3 / X100 MAX for this car; 6 of them list all keys lost. Check your tool's latest coverage list before the job.